Minimum

SCPI Commands

FETCh:EVDO:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:DWCP:MINimum
CALCulate:EVDO:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:DWCP:MINimum

class Minimum

Minimum commands group definition. 2 total commands, 0 Sub-groups, 2 group commands

class CalculateStruct

Response structure. Fields:

• Reliabiltiy: int: decimal ‘Conventions and General Information’. In list mode, a zero reliability indicator indicates that the results in all measured segments are valid. A non-zero value indicates that an error occurred in at least one of the measured segments.

• Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.

• W_24_I: enums.ResultStatus2: No parameter help available

• W_24_Q: enums.ResultStatus2: No parameter help available

• W_12_I: enums.ResultStatus2: No parameter help available

• W_12_Q: enums.ResultStatus2: No parameter help available

class FetchStruct

Response structure. Fields:

• Reliabiltiy: int: decimal ‘Conventions and General Information’. In list mode, a zero reliability indicator indicates that the results in all measured segments are valid. A non-zero value indicates that an error occurred in at least one of the measured segments.

• Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.

• W_24_I: float: No parameter help available

• W_24_Q: float: No parameter help available

• W_12_I: float: No parameter help available

• W_12_Q: float: No parameter help available

calculate(segment=<Segment.Default: -1>) → CalculateStruct

# SCPI: CALCulate:EVDO:MEASurement<instance>:MEValuation:LIST:SEGMent<nr>:DWCP:MINimum
value: CalculateStruct = driver.multiEval.listPy.segment.dwcp.minimum.calculate(segment = repcap.Segment.Default)

Returns the scalar channel power for the data channel results for the segment <no> in list mode. The result is extended to the W24 and W12 I/Q values of the data channel. Only available if subtype 2 or 3 is selected. Otherwise NAV is returned in list mode. To define the statistical length for AVERage, MAXimum, MINimum calculation and to enable the calculation of the results, use the command method RsCmwEvdoMeas.Configure.MultiEval.ListPy.Segment.Modulation.set. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

param segment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return

structure: for return value, see the help for CalculateStruct structure arguments.

fetch(segment=<Segment.Default: -1>) → FetchStruct

# SCPI: FETCh:EVDO:MEASurement<instance>:MEValuation:LIST:SEGMent<nr>:DWCP:MINimum
value: FetchStruct = driver.multiEval.listPy.segment.dwcp.minimum.fetch(segment = repcap.Segment.Default)

Returns the scalar channel power for the data channel results for the segment <no> in list mode. The result is extended to the W24 and W12 I/Q values of the data channel. Only available if subtype 2 or 3 is selected. Otherwise NAV is returned in list mode. To define the statistical length for AVERage, MAXimum, MINimum calculation and to enable the calculation of the results, use the command method RsCmwEvdoMeas.Configure.MultiEval.ListPy.Segment.Modulation.set. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

param segment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return

structure: for return value, see the help for FetchStruct structure arguments.