Evm

SCPI Commands

CONFigure:EVDO:MEASurement<Instance>:MEValuation:LIMit:EVM:PEAK
CONFigure:EVDO:MEASurement<Instance>:MEValuation:LIMit:EVM:RMS

class Evm

Evm commands group definition. 2 total commands, 0 Sub-groups, 2 group commands

get_peak() → float

# SCPI: CONFigure:EVDO:MEASurement<instance>:MEValuation:LIMit:EVM:PEAK
value: float or bool = driver.configure.multiEval.limit.evm.get_peak()

Defines an upper limit for the peak values of the error vector magnitude (EVM) .

return

evm_peak: Range: 0 % to 100 %, Unit: % Additional parameters: OFF | ON (disables the limit check | enables the limit check using the previous/default limit values)

get_rms() → float

# SCPI: CONFigure:EVDO:MEASurement<instance>:MEValuation:LIMit:EVM:RMS
value: float or bool = driver.configure.multiEval.limit.evm.get_rms()

Defines an upper limit for the RMS values of the error vector magnitude (EVM) .

return

evm_rms: Range: 0 % to 100 %, Unit: % Additional parameters: OFF | ON (disables the limit check | enables the limit check using the previous/default limit values)

set_peak(evm_peak: float) → None

# SCPI: CONFigure:EVDO:MEASurement<instance>:MEValuation:LIMit:EVM:PEAK
driver.configure.multiEval.limit.evm.set_peak(evm_peak = 1.0)

Defines an upper limit for the peak values of the error vector magnitude (EVM) .

param evm_peak

Range: 0 % to 100 %, Unit: % Additional parameters: OFF | ON (disables the limit check | enables the limit check using the previous/default limit values)

set_rms(evm_rms: float) → None

# SCPI: CONFigure:EVDO:MEASurement<instance>:MEValuation:LIMit:EVM:RMS
driver.configure.multiEval.limit.evm.set_rms(evm_rms = 1.0)

Defines an upper limit for the RMS values of the error vector magnitude (EVM) .

param evm_rms

Range: 0 % to 100 %, Unit: % Additional parameters: OFF | ON (disables the limit check | enables the limit check using the previous/default limit values)