Current

SCPI Commands

READ:EVDO:MEASurement<Instance>:MEValuation:TRACe:CP:CURRent
FETCh:EVDO:MEASurement<Instance>:MEValuation:TRACe:CP:CURRent
CALCulate:EVDO:MEASurement<Instance>:MEValuation:TRACe:CP:CURRent
class Current[source]

Current commands group definition. 3 total commands, 0 Sub-groups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability Indicator’

  • Rri: enums.ResultStatus2: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Unit: dB

  • Pilot: enums.ResultStatus2: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Unit: dB

  • Ack_Dsc: enums.ResultStatus2: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Unit: dB

  • Aux_Pilot: enums.ResultStatus2: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Unit: dB

  • Drc: enums.ResultStatus2: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Unit: dB

  • Data: enums.ResultStatus2: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Unit: dB

class ResultData[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability Indicator’

  • Rri: float: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Unit: dB

  • Pilot: float: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Unit: dB

  • Ack_Dsc: float: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Unit: dB

  • Aux_Pilot: float: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Unit: dB

  • Drc: float: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Unit: dB

  • Data: float: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Unit: dB

calculate() → CalculateStruct[source]
# SCPI: CALCulate:EVDO:MEASurement<instance>:MEValuation:TRACe:CP:CURRent
value: CalculateStruct = driver.multiEval.trace.cp.current.calculate()

Returns the channel power of the reverse link physical channels of both the I and Q signal. The slots for the pilot and the RRI channel are evaluated within the same measurement slot. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:EVDO:MEASurement<instance>:MEValuation:TRACe:CP:CURRent
value: ResultData = driver.multiEval.trace.cp.current.fetch()

Returns the channel power of the reverse link physical channels of both the I and Q signal. The slots for the pilot and the RRI channel are evaluated within the same measurement slot. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:EVDO:MEASurement<instance>:MEValuation:TRACe:CP:CURRent
value: ResultData = driver.multiEval.trace.cp.current.read()

Returns the channel power of the reverse link physical channels of both the I and Q signal. The slots for the pilot and the RRI channel are evaluated within the same measurement slot. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return

structure: for return value, see the help for ResultData structure arguments.