Current¶
SCPI Commands
READ:EVDO:MEASurement<Instance>:MEValuation:MODulation:CURRent
FETCh:EVDO:MEASurement<Instance>:MEValuation:MODulation:CURRent
CALCulate:EVDO:MEASurement<Instance>:MEValuation:MODulation:CURRent
- class Current[source]
Current commands group definition. 3 total commands, 0 Sub-groups, 3 group commands
- class CalculateStruct[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability Indicator’
Evm_Rms: float: float Error vector magnitude RMS and peak value Range: 0 % to 100 %, Unit: %
Evm_Peak: float: float Error vector magnitude RMS and peak value Range: 0 % to 100 %, Unit: %
Merr_Rms: float: float Magnitude error RMS value Range: 0 % to 100 %, Unit: %
Merr_Peak: float: float Magnitude error peak value Range: -100 % to 100 % (AVERage: 0% to 100 %, SDEViation: 0 % to 50 %) , Unit: %
Perr_Rms: float: float Phase error RMS value Range: 0 deg to 180 deg, Unit: deg
Perr_Peak: float: float Phase error peak value Range: -180 deg to 180 deg (AVERage: 0 deg to 180 deg, SDEViation: 0 deg to 90 deg) , Unit: deg
Iq_Offset: float: float I/Q origin offset Range: -100 dB to 0 dB, Unit: dB
Iq_Imbalance: float: float I/Q imbalance Range: -100 dB to 0 dB, Unit: dB
Cfreq_Error: float: float Carrier frequency error Range: -5000 Hz to 5000 Hz, Unit: Hz
Trans_Time_Err: float: float Transmit time error Range: -100 µs to 100 µs, Unit: µs
At_Power_1_M_23: float: No parameter help available
At_Power_Wideband: float: No parameter help available
Wav_Quality: float: float Waveform quality Range: 0 to 1
Wav_Qual_At_Max_Pow: float: No parameter help available
Wav_Qual_At_Min_Pow: float: No parameter help available
Out_Of_Tol_Count: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count (see [CMDLINK: CONFigure:EVDO:MEASi:MEValuation:SCOunt:MODulation CMDLINK]) exceeding the specified limits, see ‘Limits (Modulation) ‘. Range: 0 % to 100 %, Unit: %
Co_Ch_Filt_Mat_Rat: float: No parameter help available
- class ResultData[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability Indicator’
Evm_Rms: float: float Error vector magnitude RMS and peak value Range: 0 % to 100 %, Unit: %
Evm_Peak: float: float Error vector magnitude RMS and peak value Range: 0 % to 100 %, Unit: %
Merr_Rms: float: float Magnitude error RMS value Range: 0 % to 100 %, Unit: %
Merr_Peak: float: float Magnitude error peak value Range: -100 % to 100 % (AVERage: 0% to 100 %, SDEViation: 0 % to 50 %) , Unit: %
Perr_Rms: float: float Phase error RMS value Range: 0 deg to 180 deg, Unit: deg
Perr_Peak: float: float Phase error peak value Range: -180 deg to 180 deg (AVERage: 0 deg to 180 deg, SDEViation: 0 deg to 90 deg) , Unit: deg
Iq_Offset: float: float I/Q origin offset Range: -100 dB to 0 dB, Unit: dB
Iq_Imbalance: float: float I/Q imbalance Range: -100 dB to 0 dB, Unit: dB
Cfreq_Error: float: float Carrier frequency error Range: -5000 Hz to 5000 Hz, Unit: Hz
Trans_Time_Err: float: float Transmit time error Range: -100 µs to 100 µs, Unit: µs
At_Power_1_M_23: float: No parameter help available
At_Power_Wideband: float: No parameter help available
Wav_Quality: float: float Waveform quality Range: 0 to 1
Wav_Qual_At_Max_Pow: float: No parameter help available
Wav_Qual_At_Min_Pow: float: No parameter help available
Out_Of_Tol_Count: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count (see [CMDLINK: CONFigure:EVDO:MEASi:MEValuation:SCOunt:MODulation CMDLINK]) exceeding the specified limits, see ‘Limits (Modulation) ‘. Range: 0 % to 100 %, Unit: %
Co_Ch_Filt_Mat_Rat: float: No parameter help available
- calculate() → CalculateStruct[source]
# SCPI: CALCulate:EVDO:MEASurement<instance>:MEValuation:MODulation:CURRent value: CalculateStruct = driver.multiEval.modulation.current.calculate()
Return the current, average, minimum, maximum and standard deviation modulation single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below. The ranges indicated below apply to all results except standard deviation results. The minimum for standard deviation results equals 0. The maximum equals the width of the indicated range divided by two. Exceptions are explicitly stated.
- return
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch() → ResultData[source]
# SCPI: FETCh:EVDO:MEASurement<instance>:MEValuation:MODulation:CURRent value: ResultData = driver.multiEval.modulation.current.fetch()
Return the current, average, minimum, maximum and standard deviation modulation single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below. The ranges indicated below apply to all results except standard deviation results. The minimum for standard deviation results equals 0. The maximum equals the width of the indicated range divided by two. Exceptions are explicitly stated.
- return
structure: for return value, see the help for ResultData structure arguments.
- read() → ResultData[source]
# SCPI: READ:EVDO:MEASurement<instance>:MEValuation:MODulation:CURRent value: ResultData = driver.multiEval.modulation.current.read()
Return the current, average, minimum, maximum and standard deviation modulation single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below. The ranges indicated below apply to all results except standard deviation results. The minimum for standard deviation results equals 0. The maximum equals the width of the indicated range divided by two. Exceptions are explicitly stated.
- return
structure: for return value, see the help for ResultData structure arguments.