Maximum

SCPI Commands

FETCh:EVDO:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:OBW:MAXimum
CALCulate:EVDO:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:OBW:MAXimum

class Maximum

Maximum commands group definition. 2 total commands, 0 Sub-groups, 2 group commands

class CalculateStruct

Response structure. Fields:

• Reliability: int: No parameter help available

• Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.

• Obw: enums.ResultStatus2: float Occupied bandwidth Range: 0 MHz to 16 MHz (SDEViation 0 MHz to 8 MHz) , Unit: MHz

class FetchStruct

Response structure. Fields:

• Reliability: int: No parameter help available

• Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.

• Obw: float: float Occupied bandwidth Range: 0 MHz to 16 MHz (SDEViation 0 MHz to 8 MHz) , Unit: MHz

calculate(segment=<Segment.Default: -1>) → CalculateStruct

# SCPI: CALCulate:EVDO:MEASurement<instance>:MEValuation:LIST:SEGMent<nr>:OBW:MAXimum
value: CalculateStruct = driver.multiEval.listPy.segment.obw.maximum.calculate(segment = repcap.Segment.Default)

In list mode, returns the occupied bandwidth (OBW) result for segment <no>. To define the statistical length for AVERage, MAXimum calculation and to enable the calculation of the results, use the command method RsCmwEvdoMeas.Configure. MultiEval.ListPy.Segment.Modulation.set. The ranges indicated below apply to all results except standard deviation results. The minimum for standard deviation results equals 0. The maximum equals the width of the indicated range divided by two. Exceptions are explicitly stated. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

param segment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return

structure: for return value, see the help for CalculateStruct structure arguments.

fetch(segment=<Segment.Default: -1>) → FetchStruct

# SCPI: FETCh:EVDO:MEASurement<instance>:MEValuation:LIST:SEGMent<nr>:OBW:MAXimum
value: FetchStruct = driver.multiEval.listPy.segment.obw.maximum.fetch(segment = repcap.Segment.Default)

In list mode, returns the occupied bandwidth (OBW) result for segment <no>. To define the statistical length for AVERage, MAXimum calculation and to enable the calculation of the results, use the command method RsCmwEvdoMeas.Configure. MultiEval.ListPy.Segment.Modulation.set. The ranges indicated below apply to all results except standard deviation results. The minimum for standard deviation results equals 0. The maximum equals the width of the indicated range divided by two. Exceptions are explicitly stated. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

param segment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return

structure: for return value, see the help for FetchStruct structure arguments.