Maximum

SCPI Commands

FETCh:EVDO:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:CP:MAXimum
CALCulate:EVDO:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:CP:MAXimum

class Maximum

Maximum commands group definition. 2 total commands, 0 Sub-groups, 2 group commands

class CalculateStruct

Response structure. Fields:

• Reliability: int: No parameter help available

• Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.

• Rri: enums.ResultStatus2: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Range: -60 dB to +10 dB , Unit: dB

• Pilot: enums.ResultStatus2: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Range: -60 dB to +10 dB , Unit: dB

• Ack_Dsc: enums.ResultStatus2: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Range: -60 dB to +10 dB , Unit: dB

• Aux_Pilot: enums.ResultStatus2: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Range: -60 dB to +10 dB , Unit: dB

• Drc: enums.ResultStatus2: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Range: -60 dB to +10 dB , Unit: dB

• Data: enums.ResultStatus2: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Range: -60 dB to +10 dB , Unit: dB

class FetchStruct

Response structure. Fields:

• Reliability: int: No parameter help available

• Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.

• Rri: float: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Range: -60 dB to +10 dB , Unit: dB

• Pilot: float: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Range: -60 dB to +10 dB , Unit: dB

• Ack_Dsc: float: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Range: -60 dB to +10 dB , Unit: dB

• Aux_Pilot: float: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Range: -60 dB to +10 dB , Unit: dB

• Drc: float: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Range: -60 dB to +10 dB , Unit: dB

• Data: float: float RMS channel power values for the physical channels. Depending on the subtype 0/1 or 2, some channels exist or not. If not available, no power measurement is possible therefore NAV is returned. Range: -60 dB to +10 dB , Unit: dB

calculate(segment=<Segment.Default: -1>) → CalculateStruct

# SCPI: CALCulate:EVDO:MEASurement<instance>:MEValuation:LIST:SEGMent<nr>:CP:MAXimum
value: CalculateStruct = driver.multiEval.listPy.segment.cp.maximum.calculate(segment = repcap.Segment.Default)

Returns channel power (CP) results for the segment <no> in list mode. To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of the results use the command method RsCmwEvdoMeas.Configure. MultiEval.ListPy.Segment.Modulation.set. The values described below are returned by FETCh commands. CALCulate commands return limit check results instead, one value for each result listed below.

param segment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return

structure: for return value, see the help for CalculateStruct structure arguments.

fetch(segment=<Segment.Default: -1>) → FetchStruct

# SCPI: FETCh:EVDO:MEASurement<instance>:MEValuation:LIST:SEGMent<nr>:CP:MAXimum
value: FetchStruct = driver.multiEval.listPy.segment.cp.maximum.fetch(segment = repcap.Segment.Default)

Returns channel power (CP) results for the segment <no> in list mode. To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of the results use the command method RsCmwEvdoMeas.Configure. MultiEval.ListPy.Segment.Modulation.set. The values described below are returned by FETCh commands. CALCulate commands return limit check results instead, one value for each result listed below.

param segment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return

structure: for return value, see the help for FetchStruct structure arguments.