Minimum

SCPI Commands

FETCh:EVDO:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:ACP:MINimum
CALCulate:EVDO:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:ACP:MINimum
class Minimum[source]

Minimum commands group definition. 2 total commands, 0 Sub-groups, 2 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: No parameter help available

  • Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.

  • Current_Acp: List[enums.ResultStatus2]: No parameter help available

  • Ms_Power_Wide: enums.ResultStatus2: No parameter help available

  • Ms_Power_Narrow: enums.ResultStatus2: No parameter help available

  • Out_Of_Tol_Count: enums.ResultStatus2: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count (see [CMDLINK: CONFigure:EVDO:MEASi:MEValuation:SCOunt:SPECtrum CMDLINK]) exceeding the specified limits, see ‘Limits (Spectrum) ‘. Range: 0 % to 100 %, Unit: %

  • Cur_Stat_Count: enums.ResultStatus2: decimal Number of evaluated valid slots in this segment. Range: 0 to 1000

class FetchStruct[source]

Response structure. Fields:

  • Reliability: int: No parameter help available

  • Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.

  • Current_Acp: List[float]: No parameter help available

  • Ms_Power_Wide: float: No parameter help available

  • Ms_Power_Narrow: float: No parameter help available

  • Out_Of_Tol_Count: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count (see [CMDLINK: CONFigure:EVDO:MEASi:MEValuation:SCOunt:SPECtrum CMDLINK]) exceeding the specified limits, see ‘Limits (Spectrum) ‘. Range: 0 % to 100 %, Unit: %

  • Cur_Stat_Count: int: decimal Number of evaluated valid slots in this segment. Range: 0 to 1000

calculate(segment=<Segment.Default: -1>) → CalculateStruct[source]
# SCPI: CALCulate:EVDO:MEASurement<instance>:MEValuation:LIST:SEGMent<nr>:ACP:MINimum
value: CalculateStruct = driver.multiEval.listPy.segment.acp.minimum.calculate(segment = repcap.Segment.Default)

Returns all ACP value results for the segment <no> in list mode. To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of the results use the command method RsCmwEvdoMeas.Configure.MultiEval. ListPy.Segment.Spectrum.set. The ranges indicated below apply to all results except standard deviation results. The minimum for standard deviation results equals 0. The maximum equals the width of the indicated range divided by two. Exceptions are explicitly stated. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below. For the out of tolerance and code channel filter match ratio, results retrieved via the CURRent, AVERage and MAXimum command are identical.

param segment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return

structure: for return value, see the help for CalculateStruct structure arguments.

fetch(segment=<Segment.Default: -1>) → FetchStruct[source]
# SCPI: FETCh:EVDO:MEASurement<instance>:MEValuation:LIST:SEGMent<nr>:ACP:MINimum
value: FetchStruct = driver.multiEval.listPy.segment.acp.minimum.fetch(segment = repcap.Segment.Default)

Returns all ACP value results for the segment <no> in list mode. To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of the results use the command method RsCmwEvdoMeas.Configure.MultiEval. ListPy.Segment.Spectrum.set. The ranges indicated below apply to all results except standard deviation results. The minimum for standard deviation results equals 0. The maximum equals the width of the indicated range divided by two. Exceptions are explicitly stated. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below. For the out of tolerance and code channel filter match ratio, results retrieved via the CURRent, AVERage and MAXimum command are identical.

param segment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return

structure: for return value, see the help for FetchStruct structure arguments.