Average¶
SCPI Commands
FETCh:EVDO:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:ACP:AVERage
CALCulate:EVDO:MEASurement<Instance>:MEValuation:LIST:SEGMent<Segment>:ACP:AVERage
- class Average[source]
Average commands group definition. 2 total commands, 0 Sub-groups, 2 group commands
- class CalculateStruct[source]
Response structure. Fields:
Reliability: int: No parameter help available
Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.
Current_Acp: List[enums.ResultStatus2]: No parameter help available
Ms_Power_Wide: enums.ResultStatus2: No parameter help available
Ms_Power_Narrow: enums.ResultStatus2: No parameter help available
Out_Of_Tol_Count: enums.ResultStatus2: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count (see [CMDLINK: CONFigure:EVDO:MEASi:MEValuation:SCOunt:SPECtrum CMDLINK]) exceeding the specified limits, see ‘Limits (Spectrum) ‘. Range: 0 % to 100 %, Unit: %
Cur_Stat_Count: enums.ResultStatus2: decimal Number of evaluated valid slots in this segment. Range: 0 to 1000
- class FetchStruct[source]
Response structure. Fields:
Reliability: int: No parameter help available
Seg_Reliability: int: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.
Current_Acp: List[float]: No parameter help available
Ms_Power_Wide: float: No parameter help available
Ms_Power_Narrow: float: No parameter help available
Out_Of_Tol_Count: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count (see [CMDLINK: CONFigure:EVDO:MEASi:MEValuation:SCOunt:SPECtrum CMDLINK]) exceeding the specified limits, see ‘Limits (Spectrum) ‘. Range: 0 % to 100 %, Unit: %
Cur_Stat_Count: int: decimal Number of evaluated valid slots in this segment. Range: 0 to 1000
- calculate(segment=<Segment.Default: -1>) → CalculateStruct[source]
# SCPI: CALCulate:EVDO:MEASurement<instance>:MEValuation:LIST:SEGMent<nr>:ACP:AVERage value: CalculateStruct = driver.multiEval.listPy.segment.acp.average.calculate(segment = repcap.Segment.Default)
Returns all ACP value results for the segment <no> in list mode. To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of the results use the command method RsCmwEvdoMeas.Configure.MultiEval. ListPy.Segment.Spectrum.set. The ranges indicated below apply to all results except standard deviation results. The minimum for standard deviation results equals 0. The maximum equals the width of the indicated range divided by two. Exceptions are explicitly stated. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below. For the out of tolerance and code channel filter match ratio, results retrieved via the CURRent, AVERage and MAXimum command are identical.
- param segment
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)
- return
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch(segment=<Segment.Default: -1>) → FetchStruct[source]
# SCPI: FETCh:EVDO:MEASurement<instance>:MEValuation:LIST:SEGMent<nr>:ACP:AVERage value: FetchStruct = driver.multiEval.listPy.segment.acp.average.fetch(segment = repcap.Segment.Default)
Returns all ACP value results for the segment <no> in list mode. To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of the results use the command method RsCmwEvdoMeas.Configure.MultiEval. ListPy.Segment.Spectrum.set. The ranges indicated below apply to all results except standard deviation results. The minimum for standard deviation results equals 0. The maximum equals the width of the indicated range divided by two. Exceptions are explicitly stated. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below. For the out of tolerance and code channel filter match ratio, results retrieved via the CURRent, AVERage and MAXimum command are identical.
- param segment
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)
- return
structure: for return value, see the help for FetchStruct structure arguments.