Current

SCPI Commands

FETCh:EVDO:MEASurement<Instance>:MEValuation:LIST:DWCP:CURRent
CALCulate:EVDO:MEASurement<Instance>:MEValuation:LIST:DWCP:CURRent

class Current

Current commands group definition. 2 total commands, 0 Sub-groups, 2 group commands

class CalculateStruct

Response structure. Fields:

• Reliabiltiy: int: decimal ‘Conventions and General Information’. In list mode, a zero reliability indicator indicates that the results in all measured segments are valid. A non-zero value indicates that an error occurred in at least one of the measured segments.

• Seg_Reliability: List[int]: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.

• W_24_I: List[enums.ResultStatus2]: No parameter help available

• W_24_Q: List[enums.ResultStatus2]: No parameter help available

• W_12_I: List[enums.ResultStatus2]: No parameter help available

• W_12_Q: List[enums.ResultStatus2]: No parameter help available

class FetchStruct

Response structure. Fields:

• Reliabiltiy: int: decimal ‘Conventions and General Information’. In list mode, a zero reliability indicator indicates that the results in all measured segments are valid. A non-zero value indicates that an error occurred in at least one of the measured segments.

• Seg_Reliability: List[int]: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.

• W_24_I: List[float]: No parameter help available

• W_24_Q: List[float]: No parameter help available

• W_12_I: List[float]: No parameter help available

• W_12_Q: List[float]: No parameter help available

calculate() → CalculateStruct

# SCPI: CALCulate:EVDO:MEASurement<instance>:MEValuation:LIST:DWCP:CURRent
value: CalculateStruct = driver.multiEval.listPy.dwcp.current.calculate()

Returns the scalar channel power for the data channel results in list mode. The result is extended to the W24 and W12 I/Q values of the data channel. Only available if subtype 2 or 3 is selected. Otherwise NAV is returned in list mode. To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of the results use the command method RsCmwEvdoMeas.Configure.MultiEval.ListPy.Segment.Modulation.set. The values listed below in curly brackets {} are returned for each active segment: {…}seg 1, {…}seg 2, …, {…}seg n. The number of active segments n is determined by method RsCmwEvdoMeas.Configure.MultiEval.ListPy.count. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → FetchStruct

# SCPI: FETCh:EVDO:MEASurement<instance>:MEValuation:LIST:DWCP:CURRent
value: FetchStruct = driver.multiEval.listPy.dwcp.current.fetch()

Returns the scalar channel power for the data channel results in list mode. The result is extended to the W24 and W12 I/Q values of the data channel. Only available if subtype 2 or 3 is selected. Otherwise NAV is returned in list mode. To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of the results use the command method RsCmwEvdoMeas.Configure.MultiEval.ListPy.Segment.Modulation.set. The values listed below in curly brackets {} are returned for each active segment: {…}seg 1, {…}seg 2, …, {…}seg n. The number of active segments n is determined by method RsCmwEvdoMeas.Configure.MultiEval.ListPy.count. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return

structure: for return value, see the help for FetchStruct structure arguments.