StandardDev¶
SCPI Commands
FETCh:EVDO:MEASurement<Instance>:MEValuation:LIST:ACP:SDEViation
CALCulate:EVDO:MEASurement<Instance>:MEValuation:LIST:ACP:SDEViation
- class StandardDev[source]
StandardDev commands group definition. 2 total commands, 0 Sub-groups, 2 group commands
- class CalculateStruct[source]
Response structure. Fields:
Reliability: int: No parameter help available
Seg_Reliability: List[int]: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.
Acpm_10: List[enums.ResultStatus2]: No parameter help available
Acpm_9: List[enums.ResultStatus2]: No parameter help available
Acpm_8: List[enums.ResultStatus2]: No parameter help available
Acpm_7: List[enums.ResultStatus2]: No parameter help available
Acpm_6: List[enums.ResultStatus2]: No parameter help available
Acpm_5: List[enums.ResultStatus2]: No parameter help available
Acpm_4: List[enums.ResultStatus2]: No parameter help available
Acpm_3: List[enums.ResultStatus2]: No parameter help available
Acpm_2: List[enums.ResultStatus2]: No parameter help available
Acpm_1: List[enums.ResultStatus2]: No parameter help available
Acp_Carrier: List[enums.ResultStatus2]: No parameter help available
Acpp_1: List[enums.ResultStatus2]: No parameter help available
Acpp_2: List[enums.ResultStatus2]: No parameter help available
Acpp_3: List[enums.ResultStatus2]: No parameter help available
Acpp_4: List[enums.ResultStatus2]: No parameter help available
Acpp_5: List[enums.ResultStatus2]: No parameter help available
Acpp_6: List[enums.ResultStatus2]: No parameter help available
Acpp_7: List[enums.ResultStatus2]: No parameter help available
Acpp_8: List[enums.ResultStatus2]: No parameter help available
Acpp_9: List[enums.ResultStatus2]: No parameter help available
Acpp_10: List[enums.ResultStatus2]: No parameter help available
Ms_Power_Wide: List[enums.ResultStatus2]: No parameter help available
Ms_Power_Narrow: List[enums.ResultStatus2]: No parameter help available
Out_Of_Tol_Count: List[enums.ResultStatus2]: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count (see [CMDLINK: CONFigure:EVDO:MEASi:MEValuation:SCOunt:SPECtrum CMDLINK]) exceeding the specified limits, see ‘Limits (Spectrum) ‘. Range: 0 % to 100 %, Unit: %
Cur_Stat_Count: List[enums.ResultStatus2]: decimal Number of evaluated valid slots in this segment.
- class FetchStruct[source]
Response structure. Fields:
Reliability: int: No parameter help available
Seg_Reliability: List[int]: 0 | 3 | 4 | 8 The segment reliability indicates whether one of the following exceptions occurred in this segment: 0: No error 3: Signal overflow 4: Signal low 8: Synchronization error If a combination of exceptions occurs, the most severe error is indicated.
Acpm_10: List[float]: No parameter help available
Acpm_9: List[float]: No parameter help available
Acpm_8: List[float]: No parameter help available
Acpm_7: List[float]: No parameter help available
Acpm_6: List[float]: No parameter help available
Acpm_5: List[float]: No parameter help available
Acpm_4: List[float]: No parameter help available
Acpm_3: List[float]: No parameter help available
Acpm_2: List[float]: No parameter help available
Acpm_1: List[float]: No parameter help available
Acp_Carrier: List[float]: No parameter help available
Acpp_1: List[float]: No parameter help available
Acpp_2: List[float]: No parameter help available
Acpp_3: List[float]: No parameter help available
Acpp_4: List[float]: No parameter help available
Acpp_5: List[float]: No parameter help available
Acpp_6: List[float]: No parameter help available
Acpp_7: List[float]: No parameter help available
Acpp_8: List[float]: No parameter help available
Acpp_9: List[float]: No parameter help available
Acpp_10: List[float]: No parameter help available
Ms_Power_Wide: List[float]: No parameter help available
Ms_Power_Narrow: List[float]: No parameter help available
Out_Of_Tol_Count: List[float]: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count (see [CMDLINK: CONFigure:EVDO:MEASi:MEValuation:SCOunt:SPECtrum CMDLINK]) exceeding the specified limits, see ‘Limits (Spectrum) ‘. Range: 0 % to 100 %, Unit: %
Cur_Stat_Count: List[int]: decimal Number of evaluated valid slots in this segment.
- calculate() → CalculateStruct[source]
# SCPI: CALCulate:EVDO:MEASurement<instance>:MEValuation:LIST:ACP:SDEViation value: CalculateStruct = driver.multiEval.listPy.acp.standardDev.calculate()
Returns all ACP value results in list mode. To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of the results use the command method RsCmwEvdoMeas.Configure.MultiEval.ListPy.Segment. Spectrum.set. The ranges indicated below apply to all results except standard deviation results. The minimum for standard deviation results equals 0. The maximum equals the width of the indicated range divided by two. Exceptions are explicitly stated. The values listed below in curly brackets {} are returned for each active segment: {…}seg 1, {…}seg 2, …, {. ..}seg n. The number of active segments n is determined by method RsCmwEvdoMeas.Configure.MultiEval.ListPy.count. The number to the left of each result parameter is provided for easy identification of the parameter position within the result array. The values described below are returned by FETCh commands. CALCulate commands return limit check results instead, one value for each result listed below. For the out of tolerance and code channel filter match ratio, results retrieved via the CURRent, AVERage and MAXimum commands are identical.
- return
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch() → FetchStruct[source]
# SCPI: FETCh:EVDO:MEASurement<instance>:MEValuation:LIST:ACP:SDEViation value: FetchStruct = driver.multiEval.listPy.acp.standardDev.fetch()
Returns all ACP value results in list mode. To define the statistical length for AVERage, MAXimum, MINimum calculation and enable the calculation of the results use the command method RsCmwEvdoMeas.Configure.MultiEval.ListPy.Segment. Spectrum.set. The ranges indicated below apply to all results except standard deviation results. The minimum for standard deviation results equals 0. The maximum equals the width of the indicated range divided by two. Exceptions are explicitly stated. The values listed below in curly brackets {} are returned for each active segment: {…}seg 1, {…}seg 2, …, {. ..}seg n. The number of active segments n is determined by method RsCmwEvdoMeas.Configure.MultiEval.ListPy.count. The number to the left of each result parameter is provided for easy identification of the parameter position within the result array. The values described below are returned by FETCh commands. CALCulate commands return limit check results instead, one value for each result listed below. For the out of tolerance and code channel filter match ratio, results retrieved via the CURRent, AVERage and MAXimum commands are identical.
- return
structure: for return value, see the help for FetchStruct structure arguments.