Current

SCPI Commands

READ:EVDO:MEASurement<Instance>:MEValuation:ACP:CURRent
FETCh:EVDO:MEASurement<Instance>:MEValuation:ACP:CURRent
CALCulate:EVDO:MEASurement<Instance>:MEValuation:ACP:CURRent
class Current[source]

Current commands group definition. 3 total commands, 0 Sub-groups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability Indicator’

  • At_Power_Narrow: float: float Access terminal power, measured with a filter bandwidth of 1.23 MHz. Range: -100 dBm to 50 dBm, Unit: dBm

  • At_Power_Wide: float: float Access terminal power, measured with the wideband filter. Range: -100 dBm to 50 dBm, Unit: dBm

  • Out_Of_Tol_Count: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count (see [CMDLINK: CONFigure:EVDO:MEASi:MEValuation:SCOunt:SPECtrum CMDLINK]) exceeding the specified limits, see ‘Limits (Spectrum) ‘. Range: 0 % to 100 %, Unit: %

  • Code_Ch_Filter: float: float Code channel filter match ratio, i.e. percentage of measurement intervals matching the specified code channel filter, see ‘Multi-Evaluation: Code Channel Filter’. Range: 0 % to 100 %, Unit: %

class ResultData[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability Indicator’

  • At_Power_Narrow: float: float Access terminal power, measured with a filter bandwidth of 1.23 MHz. Range: -100 dBm to 50 dBm, Unit: dBm

  • At_Power_Wide: float: float Access terminal power, measured with the wideband filter. Range: -100 dBm to 50 dBm, Unit: dBm

  • Out_Of_Tol_Count: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count (see [CMDLINK: CONFigure:EVDO:MEASi:MEValuation:SCOunt:SPECtrum CMDLINK]) exceeding the specified limits, see ‘Limits (Spectrum) ‘. Range: 0 % to 100 %, Unit: %

  • Code_Ch_Filter: float: float Code channel filter match ratio, i.e. percentage of measurement intervals matching the specified code channel filter, see ‘Multi-Evaluation: Code Channel Filter’. Range: 0 % to 100 %, Unit: %

calculate() → CalculateStruct[source]
# SCPI: CALCulate:EVDO:MEASurement<instance>:MEValuation:ACP:CURRent
value: CalculateStruct = driver.multiEval.acp.current.calculate()

Return the out of tolerance result, the code channel filter match ratio result and the AT power results. For the AT power results, the current, average and maximum values can be retrieved. The out of tolerance and code channel filter match ratio results retrieved via the CURRent, AVERage and MAXimum command are identical. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:EVDO:MEASurement<instance>:MEValuation:ACP:CURRent
value: ResultData = driver.multiEval.acp.current.fetch()

Return the out of tolerance result, the code channel filter match ratio result and the AT power results. For the AT power results, the current, average and maximum values can be retrieved. The out of tolerance and code channel filter match ratio results retrieved via the CURRent, AVERage and MAXimum command are identical. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:EVDO:MEASurement<instance>:MEValuation:ACP:CURRent
value: ResultData = driver.multiEval.acp.current.read()

Return the out of tolerance result, the code channel filter match ratio result and the AT power results. For the AT power results, the current, average and maximum values can be retrieved. The out of tolerance and code channel filter match ratio results retrieved via the CURRent, AVERage and MAXimum command are identical. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return

structure: for return value, see the help for ResultData structure arguments.